KTM 690 Enduro R 2018, Руководство по ремонту

Страница: 91 / 311

$02203-10
13.6.3.
Changing
the front brake disc
Clean
and grease
the wheel spindle.
Long-life
grease
(“
p.
280)
Jack up the front wheel into the
fork, position it,
and insert the
wheel
spindle.
” The brake linings
are
correctly
positioned.
Mountand
tighten
screw
@.
Guideline
Screw, front wheel M24x1.5 45 Nm (33.2 Ibf ft)
spindle
Operate
the hand brake
lever several times until
the brake
lin-
ings
are
seated
correctly against
the brake disc.
Remove the motorcycle from the lift stand. ("9
p.
12)
Operate
the front brake and compress the fork
a
few times
firmly.
”
The
fork legs straighten.
Tighten
screws
©.
Guideline
|
Screw, fork stub
|
m8
|
15 Nm (11.1 Ibf ft)
Position wheel
speed
sensor
@
in the drill hole. Mount and
tighten
screw
@.
Guideline
Screw,
wheel
speed M6 6 Nm (4.4 Ibf ft)
sensor
e
Info
If the brake discs
are
changed, the brake linings
must
also be changed.
402043-10
Preparatory
work
Raise the
motorcycle
with
a
lift stand.
(—>
p.
12)
Remove the front wheel. (">
p.
87)
Main work
Remove
screws
@.
Takeoff the brake disc with the ABS
sen-
sor
wheel.
Clean the
contact
surface of the brake disc.
Position the
new
brake disc with
the
label
facing
outward.
Position the ABS
sensor
wheel.
&”
The
lettering
on
the ABS
sensor
wheel is located
on
the
outside.
Mount and
tighten
screws
Oe.
Guideline
Screw, front M6 14 Nm (10.3 Ibf ft)
brake disc
Loctite®243TM
Finishing
work
Install the
front wheel. (©"
p.
88)
89