KTM 690 Enduro R 2018, Руководство по ремонту

Страница: 35 / 311

401454-11
On the
upper
triple clamp,
there
are
two
holes
at
a
distance of
©
to
each other.
Hole distance
@
|
15
mm
(0.59in)
|
The holes
on
the handlebar support
are
placed
at
a
distance of
©
from
the center.
Hole distance
@
|
3.5
mm
(0.138 in)
|
The handlebar
can
be mounted in 4 different
positions.
In this
way,
the handlebar
can
be mounted in the
most
comfortable posi-
tion
for the rider.
401454-10
—
Remove
screws
@.
Take off the handlebar
clamps.
Remove
the handlebar and lay it
to
one
side.
e
Info
Cover
the components to protect them
against damage.
Do
not
bendthe cables
and
lines.
—
Remove
screws
@.
Remove the handlebar
support.
—
Place the handlebar
support
in the
required position.
Mount
and
tighten
screws
@.
Guideline
Screw,
handle- M10 40 Nm (29.5 Ibf ft)
bar support
Loctite®243TM
e
Info
Position the left and
right
handlebar supports
evenly.
-
Position the handlebar.
e
Info
Make
sure
the cables and
wiring
are
positioned
cor-
rectly.
—
Position the handlebar
clamps.
Mount
screws
@
and
tighten
evenly.
Guideline
Screw,
handlebar M8 20 Nm
(14.8
Ibf
ft)
clamp
33