- 5 -
1.0 Introduction
The
KSM-Multistoker Tuxedo
complies with the law made by the authority concerned security on
boilers. This has given us the opportunity to become CE-marked according to the machinery directive
98/37/EF.
The
KSM-Multistoker Tuxedo
is validated by Danish Test Station For Small & Medium Bio fuel
Boilers.
The
KSM-Multistoker Tuxedo
has a very large heating surface which helps giving a good smoke
cooling.
The boiler is constructed in powerful plates and a lot of body bracing.
The
KSM-Multistoker Tuxedo
is delivered with automatic feeding system from an extern silo.
The burning chambers of the KSM-Multistoker Tuxedo are built in stones which can resist enormous
temperatures which the KSM-stoker is producing while it is operating.
The enormous burning temperatures which can reach about 1200°C in a KSM-Boiler contribute to burn
the smoke gas completely and grant a high-end output degree.
The nozzles in the
KSM-Multistoker Tuxedo
are constructed in stainless steel, because this material is
far more fire-resistant than normal steel.
The full modulating O2 steering-system has a setup according to the applicable rules.
The run instructions are illustrated on the following pages.
The upside of a KSM’s full modulating O2 steering-system is that the stoker always uses exactly the
power required for the applicable consumption of the boiler.
The amount of air is automatically adjusted in a way so it fits the actually consumption. Also the burning
fuel is regulated compared to receive signals from the O2 sensor in a way so the stoker always has the
correct deflagration.