KSB Hya-Solo DV Series, Инструкция по установке и эксплуатации

Страница: 9 / 56

2.1.7 Safety information for maintenance, inspection and installation work
▪
Modifications or alterations of the pressure booster system are only permitted
with the manufacturer's prior consent.
▪
Use only original spare parts or parts authorised by the manufacturer. The use of
other parts can invalidate any liability of the manufacturer for resulting damage.
▪
The operator ensures that all maintenance, inspection and installation work is
performed by authorised, qualified specialist personnel who are thoroughly
familiar with the manual.
▪
Carry out work on the pressure booster system during standstill only.
▪
The pump casing must have cooled down to ambient temperature.
▪
Pump pressure must have been released and the pump must have been drained.
▪
When taking the pressure booster system out of service always adhere to the
procedure described in the manual.
▪
Decontaminate pressure booster systems which handle fluids posing a health
hazard.
▪
As soon as the work is completed, re-install and/or re-activate any safety-relevant
and protective devices. Before returning the product to service, observe all
instructions on commissioning. (
⇨
Section 7.1 Page 26)
▪
Make sure the pressure booster system cannot be accessed by unauthorised
persons (e.g. children).
2.1.8 Unauthorised modes of operation
Always observe the limits stated in the product literature.
The warranty relating to the operating reliability and safety of the pressure booster
system supplied is only valid if the equipment is used in accordance with its intended
use. (
⇨
Section 2.1.2 Page 7)
2 Safety
Hya®-Solo DV 9 of 56