Main menu key
Sub-menu
Information displayed
3-5 Setpoint
3-5-1 General Settngs
3-5-2 Preset Setpoint
3-5-3 Prset Out Freq1
3-5-4 Setpoint source
3-6 Limits&Warns
3-6-1 Motor Limits
3-6-2 Motor Warnings
3-6-3 Analog IN Wrn
3-6-4 Load Warnings
3-6-5 Setpoint Warns
3-6-6 Feedback Warn
3-7 Digital IN/OUT
3-7-1 Digital IN 2-5
3-7-2 Digital OUT 1
3-7-3 Digital OUT 2
3-8 Analog IN/OUT
3-8-1 Analog IO Mode
3-8-2 Analog IN 1
3-8-3 Analog IN 2
3-8-4 Analog OUT 1
3-9 PI Controller
3-9-1 Process PI Ctrl
3-9-2 Feedback Source
3-10 Communikation
3-10-1 General Settngs
3-11 Add Settings
3-11-1 Inverter Switch
3-11-2 Trip
3-11-3 Crrnt Lim Ctrl
3-11-4 Max Output
3-11-5 PDrive Settings
3-12 Adv Pump Ctrl
3-12-1 Flow Rate Meas
3-12-2 Low Q Limit
3-12-3 H/P/Q Curves
3-12-4 Pump Protection
3-12-5 MultipumpConfig
3-12-6 dp sensorless
4-Information
4-1 PDrive Info
4-1-1 PDrive ID/LON Identificat
4-2 Panel
4-2-1 Panel Ident
8.3
Access levels
Various access levels have been defined to prevent accidental or unauthorised access
to the pressure booster system parameters.
Unless users log on to one of the other access levels, they will only have limited access
to parameters.
Access level for suitably trained users.
This level enables access to all the parameters required for commissioning. A
password has to be entered under 3-1-6-1, Login. The password can be changed
under 3-1-6-4, Customer Passwd, after entering "0000" (factory password). If
password protection is deactivated via parameter 3-1-6-5, this access level becomes
the "Standard" access level. This applies to the factory settings.
Access level for service personnel.
Access level for the manufacturer only.
NOTE
If no keys are pressed for ten minutes, the system will automatically return to the
"Standard" access level.
"Standard" level
"Customer" level
"Service" level
"Factory" level
8 Operating the Pressure Booster System
Hya®-Solo DV
33 of 56
