manualshive.com logo in svg

KSB Hya-Solo DV Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
KSB Hya-Solo DV Series Скачать руководство пользователя страница 43

9

   

Servicing/Maintenance

9.1

   

General notes/Safety regulations

The operator ensures that all maintenance, inspection and installation work is
performed by authorised, qualified specialist personnel who are thoroughly familiar
with the manual.

DANGER

Inadvertent start-up of pressure booster system

Danger to life!

▷

The pressure booster system must be de-energised before repair or maintenance
work is carried out.
Switching off the motor protection switch will not de-energise the motor power
cables reliably.

WARNING

Inadvertent start-up of pressure booster system

Risk of injury by moving parts!

▷

Make sure the pressure booster system has been de-energised before
commencing work on the pressure booster system.

▷

Make sure that the pressure booster system cannot be started up accidentally.

WARNING

Unqualified personnel performing work on the pressure booster system

Risk of personal injury!

▷

Always have repair and maintenance work performed by specially trained,
qualified personnel.

CAUTION

Incorrectly serviced pressure booster system

Function of pressure booster system not guaranteed!

▷

Regularly service the pressure booster system.

▷

Prepare a maintenance schedule for the pressure booster system, with special
emphasis on lubricants, shaft seals and pump couplings.

Observe the general safety instructions and information. (

⇨

 Section 9 Page 43)

Observe the operating manual of the pump when performing work on the pumps.

In the event of damage you can always contact our service staff.

A regular maintenance schedule will help avoid expensive repairs and contribute to
trouble-free, reliable operation of the pressure booster system with a minimum of
maintenance expenditure and work.

Never use force when dismantling and re-assembling the pressure booster system.

9.1.1   Inspection contract

For all inspection and servicing work to be carried out at regular intervals we
recommend taking out the inspection contract offered by KSB. Contact your Service
Partner for details.

Check list for commissioning, inspection and maintenance 

 

 

 

 

 

 

 

 

 

 

 

9 Servicing/Maintenance

 

Hya®-Solo DV

43 of 56

Содержание Hya-Solo DV Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды