KSB Hya-Solo DV Series, Инструкция по установке и эксплуатации

Страница: 7 / 56

2 Safety
All the information contained in this section refers to hazardous situations.
2.1 Key to safety symbols/markings
Table 3: Definition of safety symbols/markings
Symbol Description
!
DANGER
DANGER
indicates a high-risk hazard which, if not avoided, will result in
death or serious injury.
!
WARNING
WARNING
indicates a medium-risk hazard which, if not avoided, could result
in death or serious injury.
CAUTION
CAUTION
indicates a hazard which, if not avoided, could result in damage to
the machine and its functions.
General hazard
in conjunction with one of the signal words indicates a hazard
which will or could result in death or serious injury.
Electrical hazard
identifies information about protection against electrical voltage.
In conjunction with the signal word CAUTION, this symbol indicates
a hazard for the machine and its functions.
2.1.1 General
This manual contains general installation, operating and maintenance instructions
that must be observed to ensure safe operation of the pressure booster system and
prevent personal injury and damage to property.
The safety information in all sections of this manual must be complied with.
This manual must be read and completely understood by the responsible specialist
personnel/operators prior to installation and commissioning.
The contents of this manual must be available to the specialist personnel at the site
at all times.
Information attached directly to the pressure booster system must always be
complied with and be kept in a perfectly legible condition at all times. This applies
to, for example:
▪
Arrow indicating the direction of rotation
▪
Markings for connections
▪
Name plate
The operator is responsible for ensuring compliance with all local regulations which
are not taken into account in this manual.
2.1.2 Intended use
The pressure booster system must only be operated within the operating limits which
are described in the other applicable documents.
▪
Only operate pressure booster systems which are in perfect technical condition.
▪
Do not operate partially assembled pressure booster systems.
▪
The pressure booster system must only handle the fluids described in the product
literature of the respective design variant.
▪
Never operate the pressure booster system without the fluid to be handled.
!
DANGER
2 Safety
Hya®-Solo DV 7 of 56