R E P A I R
Replacing PCB assembly
The PCB assembly consists of
a main PCB (O)
and a small PCB (P) for the power button.
1. Remove housing left first.
2. Unplug 3 connectors from main PCB:
Valve Detection (to microswitch in extraction head)
Capsule Holder (to reed contact in extraction head)
NTC (to thermoblock)
3. Unplug pigtail of main pcb from cup lighting assembly.
4. Unplug 4 flat receptacles from main pcb:
Pump
Line
Neutral
Heater
The PCB of the
power button is part
of the PCB assembly
and cannot be replaced
separatedly.
Содержание KP 5000
Страница 26: ...R E P A I R Removing housing back 2 Loosen 6 security screws on the housing back D 3 Remove housing back...
Страница 60: ...R E P A I R 12 Release latch with screwdriver and pull off locking handle r 13 Remove 2 screws n...
Страница 63: ...W I R I N G D I A G R A M W I R I N G D I A G R A M Wiring diagram for 100V 120V 230V mains voltage...
