R E P A I R
General assembly information
•
Reassemble machine in reverse order of general disassembly.
Assembling spacers
•
Left and right spacers are interchangeable but have a special fitting position.
Assembling housing left / right
•
Before assembling, check housing left and right for scratches, defect snap connec
tions or latches. Replace if necessary.
•
Insert housings at the bottom of centerpart at first.
•
Pay attention to correct fitting position of PCB assembly in housing left.
Check function of power button after assembly (audible click).
•
Make sure that all snap connections and latches of housing left and right are closed
and locked. Pay special attention to the snap connection (K) between the two
housing parts at the top.
Содержание KP 5000
Страница 26: ...R E P A I R Removing housing back 2 Loosen 6 security screws on the housing back D 3 Remove housing back...
Страница 60: ...R E P A I R 12 Release latch with screwdriver and pull off locking handle r 13 Remove 2 screws n...
Страница 63: ...W I R I N G D I A G R A M W I R I N G D I A G R A M Wiring diagram for 100V 120V 230V mains voltage...
