Krups KP 5000, Руководство по обслуживанию

Страница: 10 / 73

O P E R A T I N G
Preparation, first use
The new machine has to be rinsed properly before first use according to the following
sequence:
A timer or stop
watch is helpful to
observe the rinsing
times.
The machine will
not work without a
capsule holder inserted.
Do not insert a
capsule yet.
The pre-heating
time is approx.
30 sec.
1. Rinse water tank at first. Then fill
water tank with fresh, potable water.
2. Check that capsule holder is empty
(no capsule) for the following rinsing
precedure.
3. Insert capsule holder and close
locking handle.
4. Place a jug with enough capactiy
under outlet.
5. Make sure that selection lever is in
central position.
6. Connect mains plug.
7. Switch machine ON.
8. Wait till power button lights up green. 9. Set selection lever at position
(
(cold water). Let water run through
for approx. 60 sec.