Krone Vario Pack 1510 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 100

Krone Vario Pack 1510 Скачать руководство пользователя страница 6

I - 2

General Information

1.2.6 Operation in Accordance with

Intended Use

The Vario Pack 1510 and Vario Pack 1810 round balers
are designed for use only for standard use in
agricultural work (operation in accordance with intended
use).

Any use of the machine for other purposes is deemed
not to be in accordance with intended use. The
manufacturer shall not be held liable for any damage
which resulting from improper use, which is undertaken
at the operator's own risk.

Operation in accordance with intended use also
includes observing the operating, maintenance and
service instructions specified by the manufacturer.

Permissible baling material:
grass fodder such as hay, straw and silage.

The collection and baling of other
materials is permitted only with the
prior approval of the manufacturer.
The basic requirements in any case
are swath form loading of the baling
material and automatic lifting by the
pick-up.

1.2.7 General Technical Data

• Road driving is permitted only when the bale

chamber is empty and closed.

• Permissible top speed: 40 km/h / 30 km/h

• For machines which have no brakes, the pulling

tractor's tare weight must correspond with the
permitted operating specifications, or at least have a
weight which corresponds with the baler's tare
weight.

• For machines which have an operating permit, follow

the conditions contained therein!

• When operating the baler in the field, a supporting

load of 600 kg (on the ring hitch) should not be
exceeded.

• Switch off the electrical operating control when

driving on roads!

The tailgate must only be operated if
the baler is attached correctly to the
tractor. If this is not respected there is
a risk of tipping to the rear.

«
...
4
5
6
7
8
...
»

Содержание Vario Pack 1510





































































































Отзывы:

Нет отзывов