Krone Vario Pack 1510, Руководство по эксплуатации, Страница: 48 / 100

V - 18
Basic Settings and Operation
5.9.8 Selecting Wrapping Mode
Control unit Medium
• Actuate the ON/OFF switch (1).
Net wrapping is selected using switch (6).
= Net wrapping
= Twine wrapping
5.10Bale Counter
The bale counter (1) is mounted on the left hand side of
the machine behind the rear side guard plate. The bale
counter is activated by a chain (2) every time the tail gate
is opened. The bale counter can be set back using the
knurled screw (3).
5.9.7 Selecting the number of bale wraps
The adjusting screw (2) for setting the number
of bale wraps has a left-handed thread!
The number of times the bales are wrapped can be set
on the right-hand side of the machine on the adjusting
screw (2). The point (3) of the spring bar should not be
positioned on the adjusting screw. Insert an Allen key into
position (4) on the adjusting screw and unfasten the
counter nut (1) (please note - left-handed thread). The
adjusting screw can be turned by using the Allen key. The
further the screw is turned, the more often the round
bales are wrapped. Retighten the counter nut securely
after adjustment.
Distance "a" Number
mm of wraps
8 1
15 2
22 3
The measurement "a" = distance from the insertion point
of the spring bar tipto the end of the adjusting screw.
Check the values on a finished bale and correct them if
necessary.
1
RP000052
3
2
4
a
4
1
3
2
RP000007
1
RP600008
6