Krone Vario Pack 1510, Руководство по эксплуатации, Страница: 46 / 100

V - 16
Basic Settings and Operation
Insert the net (3) over the guide shaft (1) below the net
stretcher bar (2) between the rubber-coated roller (4) and
the pressure roller (5). The net should project abt. 50 mm
from the knife bar.
• Pull the flat iron (1) forward.
• Fold the net stretcher bar (2) downwards and engage.
Once installed, the netting roll can be aligned to the right
and left in the centre to the machine using the mounting
lever (2).
To pull the netting, release the brake. To do this press
lever (1) downwards.
Place the net brake callipers (3) below the netting roll.
5.9.5 Setting the Net Brake
In the basic setting, the tensioning bolt dimension should
be a = 5 mm.
If the net gets caught up during baling,
then tension must be increased on the
spring (1) of the net brake.
The brake spring (1) can be tightened at the eye bolt (2).
If the net does not feed correctly at the start, pressure
roller tension can be increased by adjusting the spring (3).
RBV04041
2
1
1
2
RBV00111
3
RP-99-002
1
3
2
a
ca. 50 mm
RP000048
3
1
2
4
5
6