Krone Vario Pack 1510, Руководство по эксплуатации, Страница: 5 / 100

I - 1
General Information
1 General Information
This operating manual contains basic instructions to
follow for assembly, operation and maintenance.
For this reason, these operating instructions must be
read by operating personnel before commissioning
and use, and need to be available for easy reference.
Follow both the general safety instructions contained
in the section on safety and the specific safety
instructions contained in the other sections.
1.1 Intended Operation
The Vario Pack 1510 and Vario Pack 1810 round
balers are composite balers with variable bale
chambers.They compact agricultural baling materials
such as hay, straw or wilted silage into round bales.
The variable bale chambers of the Vario Pack 1510
make it possible to produce round bales with a
diameter of approximately 1.00 - 1.50 m; the Vario
Pack 1810 produces bales approximately 1.00 - 1.80
m in diameter. The width of the round bales is 1.20 m.
The round balers are equipped with a double twine
and / or a net wrapping device.
1.2 Technical Data
1.2.1 General Information
This operating manual is valid for the Vario Pack 1510
and Vario Pack 1810 round balers starting with serial
number 541 290.
1.2.2 Manufacturer's Address
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10
D-48480 Spelle (Germany)
Telephone: (49) 59 77/935-0
Fax: (49) 59 77/935-339
E-mail: info.ldm@krone.de
1.2.3 Certification
Declaration of Conformity (The requirements of EC
Machine Directive 89/392/EEC; 3. amending directive
from 22.7.93 have been fulfilled.)
See reverse side of title page
1.2.4 Identification
Type
Year
Vehicle
ID No.
The entire identification plate
represents a legal document and
should not be altered or rendered
illegible!
1.2.5 Data Required for Questions and
Orders
When making questions concerning the machine or
ordering replacement parts, be sure to provide type
designation, vehicle ID number and year of
manufacture.
Genuine replacement parts and
accessories authorized by the
manufacturer help ensure safety.
Use of other parts may void liability
for damage which results.
The machine data are listed on an identification plate
(1).This is located on the right-hand side of the
machine under the twine box.
M a s c h i n e n f a b r i k B e r n a r d K r o n e G m b H
Heinrich-Krone-Str. 10 D-48480 Spelle
M a d e i n
G e r m a n y