Krone Vario Pack 1510, Руководство по эксплуатации, Страница: 37 / 100

V - 7
Basic Settings and Operation
5.8.3 General Information
The twine is threaded from the twine box over the twine eyelet and the twine brake to the stepped roller (8). From
thereit is threaded via the twine wrapping mechanism (2) between the rubber-coated roller (4) and the pressure
roller (3) and into the area around the knife bar (1). When the wrapping process begins, the rubber-coated roller (4)
is actuated and feeds the twine into the rotating round bale. The twine is picked up by the round bale.
The twine wrapping mechanism (2) feeds the two twine threads over the round bale from inside to outside and
back again. A sensor on the twine wrapping mechanism signals the final stage of the wrapping process.The twine
is then cut and the wrapping process is ended.
5.8.2.2 Components Twine and Net Wrapping (with twine)
1 knife bar and guide
2 twine wrapping mechanism
3 pressure roller
4 rubber roller
5 net stretcher bar 6 twine box
7 pressure roller tension spring
8 stepped roller
9 net brake spring
10 brake lever
11 net brake
12 connecting link guide
RP000043
6
3
12
7
8
2
4
1
11
10
9
5