EN
96200-xxx_00 GA USV Tropic 2.0_20160229.docx
- 53 -
6.5.1
Mounting the table model (Optional accessories)
-
Fit the pole (300 mm long) into the holder at the back of the
nebulizer and secure it in place with the locking screw.
-
Slide the holding-down device (to secure the lid of the nebulizer
chamber) and the hinged arm onto the pole and position them
as required.
Avoid a sagging of the patient hose, see 6.4
Note
Now place the adjusting ring of the bottle holder (27) onto the stainless steel pole and fix it in place in the
desired position using the rotary knob. Hang a container with the liquid to be nebulized on the bottle
holder.
The air intake opening of the container should be opened so that the infusion can continue to flow into
the nebulizer chamber.
6.5.2
Mounting the wall-mounted model accessory set (Optional accessories)
26
Stainless steel pole 25 x 600 mm
27
Hinged arm with adjusting ring
28
Bottle holder with adjusting ring
29
Holding-down device with
adjusting ring
30
Rail clamp for standard rail
•
Attach the bracket and the pole (600 mm long) to a standard
rail (25 x 10 mm) on the wall.
•
Fit the TROPIC 2.0 onto the pole using the holder at the back of
the nebulizer and secure it in place with the locking screw.
•
Slide the holding-down device (to secure the lid of the
nebulizer chamber) and the hinged arm onto the pole and
position them as required.
28
26
27
30
29
