KROHNE OPTISONIC 6400, Руководство пользователя

Страница: 64 / 84

5
OPERATION
64
OPTISONIC 6400
www.krohne.com 08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
"Direction"
"Normal" or "Inverse" shows the direction of exceeding the threshold setting in order to log an
event. Normal is when the threshold value is passed by an increasing value of the parameter.
5.3.2 Step 2: how to start data logging
Data logging can only be done in the measurement mode. This will happen after the logger is
armed (activated) in the above menu. In addition this may depend on time and date if a start/stop
time/date for the logger is set.
"Start/stop logger now" "Yes" "Logger armed" will appear in the bottom blue line, pressing it
again will make it disappear. If the "Logger armed" is on, data will be logged in accordance with
the settings filled in "Logger setup" when the measuring mode is entered. When the measuring
mode is left, datalogging will stop. When the logger is armed it is not possible to change settings
of the logger.
If required, a start stop time and date for the logger can be set. After arming the logger the set
date and time will be considered for starting and stopping the datalogger.
2.4.4.5.4.3
Measurement Measurement Measurement Measurement
Threshold
Hysteresis
Polarity
Direction
Volume flow Volume flow Volume flow Volume flow
180.0 m
3
/h
3.600 m
3
/h
Normal
Normal
13-04-2010 14:11:09 13 MB free
2.4.4
Start/stop logger now
Set start time
Set stop time
Arm/disarm logger
Logger setup Logger setup Logger setup Logger setup
13-04-2010 14:11:09 13 MB free
2.4.4
Start/stop logger now
Set start time Set start time Set start time Set start time
Set stop time
Arm/disarm logger
Logger setup
13-04-2010 14:11:09 13 MB free