KROHNE OPTISONIC 6400, Руководство пользователя

Страница: 20 / 84

3
INSTALLATION
20
OPTISONIC 6400
www.krohne.com 08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
3.3.6 Step 6: program the converter
In the menu "Settings and information Device Password" a password can be set. In
measuring mode the password blocks the measurement mode after the display sleep time has
passed. The measurement mode can only be left after typing the password.
Select "Installation" from the main menu, then press " " and select the desired configuration.
CAUTION!
Because the converter remember most of its previous settings, you may wish to reset the
converter before installing at a new location to prevent unexpected behavior. To reset the
converter, enter the "Settings and information" menu and select "Load factory settings".
1.2
Pipe tag
Outer diameter
Material
Wall thickness
Liner material
< Previous | Next > < Previous | Next > < Previous | Next > < Previous | Next >
Pipe1
100.00 mm
Carbon steel
5.00 mm
None
13-04-2010 14:11:09 13 MB free
Pipe tag Give the pipe a name
Press again " " and " ".
Outer diameter Use the outside diameter
Material Choose the right material
Wall thickness Fill in the pipe wall thickness material
Liner material Select whether there is a liner or not
Choose next
CAUTION!
Inaccurate input of the outside diameter will affect the accuracy of the measured flow rate.
1.3
Fluid
VoS Fluid
Viscosity
< Previous | Next > < Previous | Next > < Previous | Next > < Previous | Next >
Water
1485.0 m/s
1 mm
2
/s
13-04-2010 14:11:09 13 MB free
Fluid Give the right liquid from the table. If the liquid is unknown,
choose water. The correct value will be measured.
VoS Fluid Velocity of Sound. Only change it if it is well known.
Viscosity Only change it if it is well known.
Choose next