KROHNE OPTISONIC 6400, Руководство пользователя

Страница: 30 / 84

3
INSTALLATION
30
OPTISONIC 6400
www.krohne.com 08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
F factory settings error during CRC check of factory
settings
F back up 1 (or 2)
settings
error during CRC check of back up 1
(or 2) settings
F signal lost
path 1
signal lost at path 1 check signal cable / check for pipe
obstructions
F signal lost
path 2
signal lost at path 2 check signal cable / check for pipe
obstructions
F pipe/sens1
param.
unrealistic parameter settings for
pipe in combination with path 1
check parameters in menu X6
F pipe/sens2
param.
unrealistic parameter settings for
pipe in combination with path 2
check parameters in menu X6
S unreliable 1 unreliable measurement at pipe 1 check process conditions for gas
bubbles, solids
S unreliable 2 unreliable measurement at pipe 2 check process conditions for gas
bubbles, solids
S zero converter invalid value at power up power off - wait 5 seconds - power
on device
S overflow
counter 1 (or 2,
3)
counter is overflowing and will start
again at zero
no action needed
S backplane
invalid
error during CRC check of
backplane
restore data records on backplane
I counter 1 (or 2,
3) stopped
counter has stopped reset counter in menu C8.9.1
(or C8.9.2, C8.9.3)
I control input A
(or B) active
information only no action needed
I over range
display 1 (or 2)
1
st
row on 1
st
(or 2
nd
) measurement
page is limited by parameter setting
extend upper or lower limit for
limitation in menu C8.3.4
I backplane
sensor
incompatible data sensor on
backplane
I backplane
settings
incompatible data on backplane
I backplane
difference
different data on backplane and
display
I optical
interface
optical interface is operational, local
display can not be used
I softw sync
error
incompatible DSP and
microprocessor software