Krautzberger 200-0153, Руководство по эксплуатации

Страница: 34 / 49

8.6 Changing the needle seals
Removing the needle seals
1. Clean automatic spray gun (
Ä
Chapter 8.3 ‘Cleaning the automatic spray gun’
on page 27 ).
2. Unscrew the cap nut (
Ä
Chapter 8.4 ‘Changing the fluid nozzle and the air nozzle’
on page 29 )
Fig. 14: Removing the needle seals
3. Loosen fastening screws ( Fig. 14/8) of the head section ( Fig. 14/7) and remove head sec-
tion.
4. Pull needle guide ( Fig. 14/4) out of control section.
If the needle guide is lodged tight, dismantle the fluid needle (
Ä
Chapter 8.5
‘Changing the fluid needle’ on page 30) and carefully push the needle guide out.
5. Remove the slotted rings ( Fig. 14/1, 2 and 5).
6. Check the condition of the O-rings ( Fig. 14/3 and 6), remove if necessary.
Operating instructions
T-Dok-214-GB-Rev.2
mail@krautzberger.com, www.krautzberger.com GB–34