Krautzberger 200-0153, Руководство по эксплуатации

Страница: 33 / 49

Fig. 13: Attaching the fluid needle
5. If necessary, insert O-rings ( Fig. 13/2 and 3) and insert separating disk ( Fig. 13/4) in con-
trol section ( Fig. 13/1).
6. Carefully push piston ( Fig. 13/6) with needle ( Fig. 13/5) into the control section (
Fig. 13/1).
7. Insert pressure spring ( Fig. 13/7).
8. Screw valve seal ( Fig. 13/8) into control section ( Fig. 13/1) and tighten with fork wrench.
9. After assembly, check the tight fit of all parts.
10. Check moving parts to make sure they run easily.
Automatic spray gun M14
ENGLISH
■ 200-0153 GB–33