background image

7  Operation

7.1  Safety

Personnel:

n

User

n

Specialised personnel

Protective equipment:

The selection of the personal protective equipment depends on the utilised medium of the system
owner. The information provided by the medium manufacturer indicated on the safety data sheet
must be adhered to in order to ensure the proper selection of personal protective equipment.

 WARNING!

Risk of injury due to improper operation!

Improper operation can lead to serious personal injuries or property damage.

Note:

Never point compressed air at people.

Check the material and compressed air hose lines before each use for damage and tight
fit.

Adhere to the spray media manufacturer's specifications in the safety data sheet.

Make sure that the connected compressed air is oil-free and free of solid matter.

 WARNING!

Risk of death, risk of injury or property damage due to hazardous media!

Potential consequences: The application of hazardous media can lead to death, severe inju-
ries or property damage.

When handling hazardous substances, ensure that the current safety data sheets of the haz-
ardous substance manufacturer are available. The necessary measures can be derived from
the content of the safety data sheet. Since the hazardous potential of a material can be reas-
sessed at any time due to lessons learned, the safety data sheet must be checked regularly
and replaced if necessary.

The system owner is responsible for the presence and the up-to-date status of the safety data
sheet and the associated generation of the risk assessment of the effected workstations.

Automatic spray gun M14

ENGLISH

 200-0153

 

GB–21

Содержание 200-0153


















































Отзывы: