Krautzberger 200-0153, Руководство по эксплуатации

Страница: 28 / 49

1. Interrupt the operation ( Ä Chapter 7.3 ‘Shutting down’ on page 23 ).
2. Switch off the system and secure it against being switched on again.
3. Connect cleaning product to material supply connection "M".
4. Switch on the compressed air supply.
5. Where applicable, switch on fluid pressure pump or pressure container for cleaning
product.
6. Begin the spray process by switching on the control air (connection "ST").
7. Spray until the cleaning product runs clear.
8. Interrupt the supply of cleaning product by switching off the pump or the pressure container.
9. Blow out cleaning product residue by briefly switching on the control air.
10. Switch off the compressed air supply and secure it against restart.
11. Clean the outside of the device with a cloth dipped in cleaning product.
12. Remove fluid and air nozzle ( Ä Chapter 8.4 ‘Changing the fluid nozzle and the air nozzle’
on page 29 ) and clean with a soft brush. Do not use hard or sharp-edged objects. We rec-
ommend our brush set. Please contact our Customer Care department for this purpose.
13. Slightly grease sliding parts. We recommend Krautzberger special grease. Please contact
our Customer Care department for this purpose.
Operating instructions
T-Dok-214-GB-Rev.2
mail@krautzberger.com, www.krautzberger.com GB–28