Krautzberger 200-0153, Руководство по эксплуатации

Страница: 32 / 49

Attaching the fluid needle
Fig. 10: Needle dimension
1. The needle dimension of 72.5 mm is pre-set and should not be changed ( Fig. 10/1).
Fig. 11: Attaching the fluid needle
2.
WARNING!
Risk of injury through the use of incorrect spare parts!
Carefully insert needle ( Fig. 11/2) in piston ( Fig. 11/1).
Fig. 12: Attaching the fluid needle
3.
WARNING!
Risk of injury through the use of incorrect spare parts!
Check the condition of the seals ( Fig. 12/1 and 3) and replace if necessary.
4. Insert the spring ( Fig. 12/2) and tighten the closure ( Fig. 12/4). Fasten piston with fork
wrench.
Operating instructions
T-Dok-214-GB-Rev.2
mail@krautzberger.com, www.krautzberger.com GB–32