Kratki LEO/100, Инструкция по эксплуатации

Страница: 3 / 63

This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation
instructions and the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or
the current Standard of Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.
This appliance installation must comply with the manufacturer's installation instructions and local codes,
if any. In the absence of local codes follow the current National Fuel Gas Code, ANSI Z223.1/NFPA 54
and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., or the current CAN/CGA B149.1
Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.
This appliance may be installed in an OEM installation in a manufactured home (USA only) or mobile
home and must be installed in accordance with the manufacturer’s instructions and the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280, in the United States, or the Standard
for Installation in Mobile Homes, CAN/CSA Z240 MH Series,
in Canada.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not
convertible for use with other gases.
This owner’s manual provides information to ensure safe installation and eff icient, dependable
operation of your fireplace insert. Please read these instructions in their entirety and make them
available to anyone using or servicing this gas fireplace.
Any modifications on this appliance are strictly prohibited. Do not attempt to alter or modify the
construction of this appliance or its components. Any modification or alteration will void the
warranty, certification and listing of this appliance.
This heater must be installed and maintained by a Qualified service agency.
Installation Requirements for the Commonwealth of Massachusetts
THIS PRODUCT MUST BE INSTALLED BY A LICENSED MASTER OR JOURNEYMAN PLUMBER OR
GAS-FITTER WHEN INSTALLED IN THE COMMONWEALTH OF MASSACHUSETTS.
1. If there is not one already present, on each floor level where there are bedroom(s), a carbon
monoxide detector and alarm shall be placed in the living area outside the bedroom(s). The carbon
monoxide detector shall comply with NFPA 720 (2005 Edition).
2. A carbon monoxide detector shall:
a) Be located in the room that houses the appliance or equipment;
b) Be either hard-wired or battery powered or both; and
c) Shall comply with NFPA 720 (2002 Edition).
3. A Product-approved vent terminal must be used, and if applicable, a Product-approved air intake
must be used. Installation shall be in strict compliance with the manufacturer’s instructions. A copy
of the installation instructions must remain with the appliance or equipment at the completion of
the installation.