10
NT-52P - Initial Configuration and Use Overview
To configure the NT-52P
:
1. Connect the Ethernet port on the rear panel of the
NT-52P
to a PC, either
directly or via a LAN, (see
Section 6.1
2. Using a Web browser and the relevant IP address or host name (see
Section 9.1
), browse the General Info home page (see
3. Click
Device Settings
to browse to the Device Settings page, (see
4. Enter the time and date manually, or enter the Time server address for
automatic time and date synchronization.
5. Click
Save Changes
.
6. Click
Communication
to browse to the Communication page, (see
7. Enter the IP address, mask and gateway for static IP addressing and click
Set
. We recommend that you set a meaningful host name.
If you have changed the IP address from the default setting, you must
reload the General Info home page again using the new IP address.
8. Click
GPIO Port Settings
to browse to the GPIO Port Settings page, (see
Section 7.6
). Here you can configure digital in, digital out and analog in port
parameters.
9. Set the trigger type, voltage levels and status of each port.
10. Click
Save Changes
.
11. Click
Relay Port Settings
to browse to the Relay Port Settings page, (see
Section 7.8
). Here you can set the relays on or off.
12. If required, click
Security
(see
Section 7.9
) to browse to the Security page.
13. Click
ON
to activate security.
The user name and password credentials popup appears.