![background image](http://html1.mh-extra.com/html/kramer/nt-52p/nt-52p_user-manual_2001015028.webp)
NT-52P –
Remote Operation via the Web UI
21
To save the current configuration
:
1. Configure the device as required.
2. Click
Save
.
The Save File window opens.
3. Browse to the required location to which to save the file.
4. Enter the required name for the saved preset.
5. Click
OK
.
The current configuration is saved.
When using Chrome, the file is automatically saved in the Downloads
folder.
The following parameters are saved to the configuration file:
UI Page
Parameter
Device Settings (
Figure 7.4
Model Name
Time Zone
Daylight Savings Time mode
Use Time Server mode
Time Server Address
Sync Every Day time
Communication (
Figure 7.5
UDP Port
TCP Port
Serial Port Setting (
Figure 7.6
Serial Port
Protocol
IP Port
TCP Keep Alive
Parity
Data Bits
Baud Rate
Stop Bits
Send Replies to New Client by Default
GPIO Port Settings (
Figure 7.7)
GPIO Port
Trigger Type
Pull-up Resistor
Threshold VDC Range Min
Threshold VDC Range Max
Maximum Reported Steps