![background image](http://html1.mh-extra.com/html/kramer/nt-52p/nt-52p_user-manual_2001015073.webp)
66
NT-52P - Kramer Protocol 3000
11.3.28 NAME-RST
Functions
Permission
Transparency
Set:
NAME-RST
Administrator
Public
Get:
-
-
-
Description
Syntax
Set:
Reset machine (DNS) name to
factory default
#NAME-RSTCR
Get:
-
-
Response
~nn@NAME-RSTSPOKCR LF
Parameters
Response Triggers
Notes
Factory default of machine (DNS) name is “KRAMER_” + 4 last digits of device serial number
K-Config Example
“#NAME-RST”,0x0D
11.3.29 NET-DHCP
Functions
Permission
Transparency
Set:
NET-DHCP
Administrator
Public
Get:
NET-DHCP?
End User
Public
Description
Syntax
Set:
Set DHCP mode
#NET-DHCPSP
mode
CR
Get:
Get DHCP mode
#NET-DHCP?CR
Response
~nn@NET-DHCPSP
mode
CR LF
Parameters
mode
–
0
(do not use DHCP. Use the IP address set by the factory or the
NET-IP
command),
1
(try to use
DHCP. If unavailable, use the IP address set by the factory or the
NET-IP
command)
Response Triggers
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
NAME
command. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available
Consult your network administrator for correct settings
K-Config Example
Enable DHCP mode, if available:
“#NET-DHCP 1”,0x0D