![background image](http://html1.mh-extra.com/html/kramer/nt-52p/nt-52p_user-manual_2001015026.webp)
NT-52P –
Remote Operation via the Web UI
19
7
Remote Operation via the Web UI
The embedded Web UI can be used to remotely operate the
NT-52P
using a Web
browser and an Ethernet connection.
Before attempting to connect:
•
Perform the initial configuration in
Section 5.1
and connecting via Ethernet in
Section 6.1
•
Ensure that your browser is supported (see
Section 9
7.1
Browsing the Web UI
To browse the Web UI:
1. Open your Internet browser. Type the IP address or host name of the device
(see
Section 5.1
) in the Address bar of your browser.
The Loading page appears followed shortly by the General Info page shown in
The General Info page displays the following:
•
Model Name
•
Firmware version
•
Device serial number
•
Web UI version