![background image](http://html1.mh-extra.com/html/kramer/nt-52p/nt-52p_user-manual_2001015047.webp)
40
NT-52P - Using NT-52P Operations
8.2
Resetting to the Factory Default Settings
To reset the device to its factory default settings
:
1. Turn off the power to the device.
2. Press and hold the Reset button on the front panel.
3. Turn on the power to the device while holding down the Reset button for a
few seconds.
4. Release the button.
The device is reset to the factory default settings.
8.3
Upgrading the Firmware
For instructions on upgrading the firmware see the “
Kramer K-Upload User
Manual
”.