Page 1
MI003790
MI003796
SENECA s.r.l.
Via Austria, 26
– 35127 –PADOVA – ITALY
Tel. +39.049.8705355
– 8705359 Fax. +39.049.8706287
Web site:
www.seneca.it
Technical assistance:
(IT),
(Other)
Commercial reference:
(IT),
(Other)
This document is property of SENECA srl. Duplication and reproduction are forbidden, if not authorized. Contents of the present
documentation refers to products and technologies described in it. All technical data contained in the document may be modified
without prior notice Content of this documentation is subject to periodical revision.
To use the product safely and effectively, read carefully the following instructions before use. The product must be used only for the use
for which it was designed and built. Any other use must be considered with full responsibility of the user. The installation,
implementation and set-up is allowed only for authorized operators; these ones must be people physically and intellectually suitable.
Set up must be performed only after a correct installation and the user must perform every operation described in the installation
manual carefully. Seneca is not considered liable of failure, breakdown, accident caused for ignorance or failure to apply the indicated
requirements. Seneca is not considered liable of any unauthorized changes. Seneca reserves the right to modify the device, for any
commercial or construction requirements, without the obligation to promptly update the reference manuals.
No liability for the contents of this documents can be accepted. Use the concepts, examples and other content at your own risk. There
may be errors and inaccuracies in this document, that may of course be damaging to your system. Proceed with caution, and although
this is highly unlikely, the author(s) do not take any responsibility for that. Technical features subject to change without notice.
USER MANUAL
Z-KEY
MODBUS ETHERNET SERIAL GATEWAY
AND SERIAL DEVICE SERVER
Summary of Contents for Z-KEY
Page 19: ...USER MANUAL Z KEY 19 Then click on send configuration to Z KEY button ...
Page 78: ...USER MANUAL Z KEY 78 Now Click on Launch Setup Press Finish the com0com setup will open ...
Page 87: ...USER MANUAL Z KEY 87 ...
Page 99: ...USER MANUAL Z KEY 99 UINT16 0 OK 40057 FP LSW 0 000000 FAIL ...
