Operating Instructions
OIE 12en Edition 2019-02
29
Operation at a glance
O
p
e
ra
ti
o
n
o
f
th
e
b
a
s
ic
f
u
n
c
ti
o
n
s
Operation at a glance
General operating steps
The following table describes the input and modification of the password as well as general operating
steps, such as the changing of values and units. The password is included in the scope of delivery and
consists of four digits.
Tab. 2 General operating steps
Aim
Operating steps
Entering the password
see "2.01 Enable password",
Page 36
1. Select Page 2.01.
2. Press SET.
The "1.30 Enter Password" page is displayed.
3. The flashing cursor indicates the active input field.
Use ARROW RIGHT/ARROW LEFT to change the position within
the digit input.
4. Use ARROW UP/ARROW DOWN to increase or decrease digits.
5. Repeat Steps 3 and 4 for all the digits.
6. Press SET.
The password is deactivated. Entries are possible.
7. Repeat Steps 1–3 to activate the password.
Change the password
see "2.02 Change password",
1. Enter the password, see above.
2. Use ARROW UP to change to the page "2.02 Setting Change
Password".
3. Press SET.
4. Use ARROW UP to change the input to "Yes".
5. Press SET.
6. Enter a new password.
7. Press SET.
The new password is accepted.
Enter a value
1. Enter the password, see above.
2. Change to the desired page.
3. Press SET.
The flashing cursor indicates the active input field.
4. Use ARROW RIGHT/ARROW LEFT to change the position within
the digit input.
5. Use ARROW UP/ARROW DOWN to increase or decrease digits.
6. Repeat Steps 3 and 4 for all the digits.
7. Press SET.
The value is entered.
Enter a minus sign
1. Use ARROW LEFT to select the first position to the left of the first
digit.
2. Press ARROW DOWN until the minus sign is displayed.
3. Press SET.
The minus sign is accepted.
Change the unit
1. Enter the password, see above.
2. Change to the desired page.
3. Press SET.
The active input field is marked.
4. Use ARROW UP/ARROW DOWN to change the unit.
5. Press SET.
The unit is changed.
