Operating Instructions
OIE 12en Edition 2019-02
23
Safety instructions for commissioning
C
o
m
m
is
s
io
n
in
g
Commissioning
Safety instructions for commissioning
Connecting cables
Safety instructions for electrical installation
►
Connect the consumer and power supply in the electronic unit,
see "Connect the pick ups and temperature sensors", page 25 and
see "Connecting the analog, relay and pulse outputs", page 25 and
see "Connecting the power supply", page 26.
The following safety instructions must be observed during commissioning:
□
The following qualifications are required for commissioning:
▪
Practical electrotechnical training
▪
Knowledge of the safety guidelines at the workplace
▪
Knowledge of the electrotechnical safety guidelines
The following safety instructions must be observed during the electrical installation:
□
The following qualifications are required for the electrical connection:
▪
Practical electrotechnical training
▪
Knowledge of the safety guidelines at the workplace
▪
Knowledge of the electrotechnical safety guidelines
□
The connecting lines of the sensor connections are to be shielded and laid separately from the
supply and measuring lines.
□
Ensure that the supply voltage is correct (24 V DC).
DANGER
Risk of death resulting from electric shock if the connection of hazardous potentials (> 48 V) to the
potential-free relay outputs (orange terminals 9–11 and/or 42–44) is required.
►
Before wiring these potential-free relay switch contacts, ensure that all wires for this purpose are
potential-free.
