Operating Instructions
OIE 12en Edition 2019-02
15
Removal
In
s
ta
lla
ti
o
n
a
n
d
r
e
m
o
v
a
l
Prerequisite:
□
All cables have been cut to length and connected
Aids
□
KRAL tool set
1. Mount the universal mount
2
on the fixing kit
3
.
2. Mount the fixing kit including universal mount to the pipe/volumeter.
3. Slide the electronic unit into the universal mount.
4. Fasten the electronic unit using the supplied screws, washers and wedge lock washers.
The electronic unit is ready to operate after the power supply has been switched on.
Removal
Prerequisite:
□
Power supply switched off
Aids:
□
KRAL tool set
□
Terminal tool
Removing the electronic unit from the control cabinet
1. Disconnect all the wires.
2. Unscrew the connecting screws between the front and sealing frames.
3. Pull of the sealing frame to the rear.
4. Pull the electronic unit with front frame from the front out of the control cabinet.
5. Press the front frame to the rear and pull it off the electronic unit.
Removing the electronic unit from the wall
1. Unscrew the connecting screws between the electronic unit and the universal mount.
2. Slide the electronic unit out of the universal mount.
Removing the electronic unit from the pipe/volumeter
1. Unscrew the connecting screws between the electronic unit and the universal mount.
2. Slide the electronic unit out of the universal mount.
Fig. 5
Fixing kit for pipe mounting /
KRAL Volumeter OMG series
Fig. 6
Fixing kit for KRAL Volumeter
OME series
1
Electronic unit
2
Universal mount
3
Fixing kit pipe mounting/OMG
1
Electronic unit
2
Universal mount
3
Fixing kit OME
1
2
3
1
2
3
