Operating Instructions
OIE 12en Edition 2019-02
55
Accessories mounting
A
c
c
e
s
s
o
ri
e
s
Fixing kit OME
Adapter set for conversion of BEM 4U to BEM 300/500
When changing from BEM 4U to BEM 500 please take into account:
The previously used temperature sensors have to be replaced by temperature sensors with Pt100
output. These temperature sensors are available from KRAL.
During conversion, observe setting the temperature sensor units.
1. Remove the BEM 4U.
2. Slide the front frame
2
and sheeting with seal
3
from the rear onto the electronic unit
1
.
3. Position the electronic unit in the control cabinet section.
4. Slide on the sheeting
5
and sealing frame
6
and fasten using the screws and lock washers
7
.
Fixing kit
Application
Article No.
suitable for
Mount on
Volumeter OME
UZA 21
1,2)
BEM 300/500 / OME 13
UZA 22
1,2)
BEM 300/500 / OME 20
UZA 24
2)
BEM 300/500 / OME 32
1)
Not suitable for OME with DIN flanges.
2)
Not suitable for OME with temperature sensor connection
Adapter set
Application
Article
No.
suitable for
□
Mounting in
control cabinet
□
Conversion of
BEM 4U to
BEM 300/500
EGT 23
BEM 300
BEM 500
Scope of delivery:
□
1 sheeting bonded to seal
□
1 sheeting
1
Electronic unit
2
Front frame*
3
Sheeting bonded to seal**
4
Control cabinet
5
Sheeting**
6
Sealing frame*
7
Screws and lock washers*
* included in the scope of delivery of the BEM 300/500
** Adapter set
1
2
3
4
5
6
7
