REMOVE THE GLASS ASSEMBLY
TABS
See Figure 7.
1. Locate the spring-loaded handles securing
the glass assembly (under the firebox).
2. Pull the handles out, then down to release
the glass assembly.
3. Pull the bottom of the glass assembly out
and lift up off the tabs (at the top).
4. Set aside where it will not be broken.
5.
Remove the log package from the firebox
and set aside.
HORIZONTAL & VERTICAL VENTING APPLICATIONS
1. INSTALL THE CHIMNEY SYSTEM FOR YOUR VENTING CONFIGURATION FOLLOWING THE CHIMNEY
MANUFACTURERS’ INSTRUCTIONS INCLUDED WITH THE CHIMNEY SYSTEM.
NOTE:
All clearances to vent system must be maintained.
IMPORTANT:
Simpson Dura-Vent DV-GS Chimney System: All joints on both the 4" and 6 5/8" sections of
the pipe must be sealed. Use the sealant provided with the fireplace or the equivalent.
LATCH HANDLES - PULL OUT, THEN DOWN TO
RELEASE GLASS ASSEMBLY.
FIGURE 7
Page 11
