kozy heat 961 DV, Инструкция по установке и эксплуатации

Страница: 27 / 34

Page 23
C
A
B
11. NOTE: When the fireplace is initially lit, condensation will appear on the glass, this is normal in all gas
fireplaces, and will disappear in one to three minutes.
TO TURN THE BURNER OFF:
To turn the burner ‘OFF’, depress the ON/OFF rocker switch to ‘OFF’, flip ‘off’ the wall switch, or adjust the
setting on the thermostat or remote control. NOTE: The pilot will stay lit.
TO TURN THE PILOT OFF:
To turn off the pilot, push in and turn the control knob to the "OFF" position. DO NOT FORCE.
WARNING: This control valve has an interlock device. After turning off the pilot, it cannot be relit
until the thermocouple has cooled, (approximately 60 seconds).
Figure 19
NOTE: A PAINT SMELL WILL OCCUR DURING THE FIRST FEW HOURS OF BURNING. IT IS
RECOMMENDED TO LEAVE THE FAN OFF DURING THIS PERIOD AS THIS WILL SPEED UP THE
PAINT CURING PROCESS.
INITIAL BURN PERIOD
DUE TO THE MAKEUP OF THE FIBER LOGS & REFRACTORY, THE CURING PROCESS MAY TAKE UP TO 4
HOURS OF BURN TIME. DURING THIS PERIOD, THE LOGS & REFRACTORY WILL DISCOLOR, BUT WILL
RETURN TO THEIR TRUE COLOR ONCE THE CURING PROCESS IS COMPLETE. DO NOT BURN THIS
FIREPLACE WITHOUT THE GLASS PROPERLY IN PLACE.
**MAKE SURE THE HOMEOWNER IS AWARE OF THIS**
NOTE: Children and adults should be alerted to the hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition. Young children should be carefully supervised when they
are in the same room as the appliance.
Clothing or other flammable material should not be placed on or near the appliance.