kozy heat 961 DV, Инструкция по установке и эксплуатации

Страница: 21 / 34

Page 17
H) LOG INSTALLATION. See Figures 13A – 13D.
This #961-50B log set includes: (1) BW1-log (1) BW4-log (1) BW7-log (1)BW10-Log
(1) BW2-log (1) BW5-log (1) BW8-log
(1) BW3-log (1) BW6-log (1) BW9-log (1) Embers pkg.
1. Position the base logs BW1, BW2, & BW3 onto the
burner cover aligning the holes and/or notches in the
bottom of the logs to the brackets in the burner cover.
Figure 13A.
BW1
BW2
Figure 13A
BW3
2. Place the base logs BW4 & BW5 onto the burner
cover aligning the holes and/or notches to the
burner cover. Figure 13B.
3. Place the center logs BW6 & BW7 over the base
BW7
logs aligning the holes and/or notches in the logs
BW6
to the base logs. Figure 13B.
BW4 BW5
Figure 13B
4. Brush rock wool burning embers onto the burner
and logs as desired.
NOTE: You will not use all the embers included in
the packet at this time. Save for future use.
BW10
5. Position top logs BW8, BW9, & BW10 onto the
BW9 BW8
previously positioned base & center logs.
NOTE: Notches have been incorporated into the side
ember panels on the floor of the firebox. The ends Figure 13C
of logs BW9 and BW10 set in the notches. Refer to
Figures 13D and 13E.
BW10
BW9
Figure 13D Figure 13E