kozy heat 911-XXL, Инструкция по установке и эксплуатации

Страница: 22 / 39

1. Align holes in mounting brackets to corresponding holes in insert face, making sure
brackets are positioned as shown in Figure 21a.
Secure with screws provided (Figure 21b).
2. Position tabs (lower end previously removed) on shroud into slots in insert face,
aligning oblong holes on inside flange of shroud side sections to holes in mounting
brackets. Secure with (4) screws (C), 2 each side. Figure 21c.
3. Slide remaining connectors on rocker switch wires to terminals on gas valve marked
TH / THTP.
4. Remove nuts from lower grill, insert grill bolts through lower hinges on insert.
Attach and tighten nuts. Figure 21d.
IMPORTANT- MOUNTING BRACKET ORIENTATION
Right mounting bracket is notched out at the bottom. Figure 21a.
Flanges on both mounting brackets face the inside of insert. Figure 21a.
OPTIONAL MASONRY PANEL INSTALLATIONS:
1. Remove screws (A) (2 ea. side) securing masonry panels. Figure 21b.
2. Align holes in mounting brackets to corresponding holes in insert face & masonry
panels, making sure brackets are positioned as shown in Figure 21b. Secure with
screws removed in step1and included in shroud components packet.
3. Position tabs (lower end previously removed) on shroud into slots in insert face,
aligning oblong holes on inside flange of shroud side sections to holes in mounting
brackets. Secure with (4) screws (C), 2 each side. Figure 21c.
4. Slide remaining connectors on rocker switch wires to terminals on gas valve marked
TH / THTP.
5. Remove nuts from lower grill, insert grill bolts through lower hinges on insert. Attach
and tighten nuts. Figure 21d.
A
C
MASONRY SHROUD ASSEMBLY & INSTALLATION
IMPORTANT: CHECK ALL CONNECTIONS WHETHER FIELD OR FACTORY MADE, FOR LEAKS.
PAGE 21
B
Figure 21a
Figure 21b
Figure 21c
Figure 21d