manualshive.com logo in svg

Korg Pa3X 61-keys, Руководство пользователя

Синтезатор Korg Pa3X с 61 клавишей предлагает широкий спектр звуков и функций для профессиональных музыкантов. Для полного ознакомления с инструментом необходимо загрузить бесплатное Руководство пользователя с manualshive.com. Узнайте все возможности этого инновационного синтезатора и создавайте музыку на высшем уровне.

Поделиться
Скачать
background image

210

Global edit mode

MIDI: MIDI Setup / General Controls

MIDI: MIDI Setup / General Controls

This page allows you to select a MIDI Setup, convert ordinary
notes to RX Noises, and set global parameters for the MIDI com-
munication.

Current MIDI Setup

MIDI Setup

MIDI channels can be automatically configured by selecting a
MIDI Setup. Each of them lets you automatically assign a value
to various MIDI parameters, to allow an easier connection with
a particular MIDI controller.

A different MIDI Setup may be automatically selected when
entering the Style Play, Song Play or Sequencer modes. To recall
a MIDI Setup for these modes, see “Midi Setup” on page 136 for
the Style Play mode, “Midi Setup” on page 158 for the Song Play
mode, and “Midi Setup” on page 196 for the Sequencer mode.

For detailed information on preloaded MIDI Setup settings, see
“MIDI Setup” on page 238.

After selecting a MIDI Setup, you can apply any changes to each
channel’s settings. To store the changes in memory, select the
Write Global-Midi Setup command in the page menu to save it
to memory (see “Write Global - Midi Setup dialog box” on
page 220).

Hint:

 To restore the original MIDI Setups, use the “Factory

Restore” command (page “Utility” of the Media mode, see
page 236). 

Warning:

 This procedure will erase all Factory and

User data from the internal memory.

Note to RX Noise

RX Noises are special sounds that make Sounds be more realis-
tic. They are usually located above C7, depending on the Sound.

Enable

When this parameter is turned on, notes received from MIDI, or
performed by one of the internal players, in the RX Noises range,
are recognized and converted to RX Noises. When off, notes are
not recognized.

Note:

 This parameter is automatically turned on when turning the

instrument on again.

General Controls

Use these parameters to set MIDI Clock and Local Off.

Clock Send

Use this parameter to turn the clock information on the MIDI
OUT or USB Device port on or off. This parameter is automati-
cally deactivated when turning the Pa3X off.

Note:

 In Song Play mode, only the Tempo of Player 1 will be sent to

the MIDI OUT or USB Device port.

Off

The Pa3X does not send the MIDI Clock signal.
You cannot slave another instrument to the Pa3X,
even when connected to the MIDI OUT or USB
Device port.

On

The Pa3X sends the MIDI Clock signal. You can
slave another instrument to the Pa3X Tempo,
Start/Stop and Play/Stop commands. Connect the
other instrument to the Pa3X MIDI OUT or USB
Device port.

Clock Source

This parameter selects the MIDI Clock source for the Style Play
and Sequencer modes.

Note:

 In Song Play mode, the Internal clock is always used.

Note:

 The Clock parameter is always set to “Internal” each time

you turn the instrument on.

Internal

Internal, i.e. the clock generated by the Pa3X
Arranger and Player 1 internal metronome.

External MIDI External from the MIDI IN port. In Style Play or

Sequencer mode, the Pa3X is slaved to an exter-
nal device, connected to its MIDI IN port. The
Start/Stop and Play/Stop commands, as well as
the metronome tempo, cannot be selected from
the control panel of the Pa3X. Use the external
device to set the tempo and start or stop the
sequencer or arranger.

External USB As the above, but referred to the USB Device port.

See “Installing the Korg USB MIDI Driver” on
page 260 for information on how to configure your
computer for MIDI Over USB communication.

Local Control On

The Local parameter turns the keyboard on or off.

Note:

 The Local parameter is automatically set to On each time

you turn the instrument on.

On

When you play the keyboard, MIDI data is sent
to the internal sound generator. If tracks are
assigned to a MIDI OUT channel, data is also
sent to the MIDI OUT or USB Device port.

Off

The keyboard is connected to the MIDI OUT or
USB Device port, but cannot play the internal
sound generator.

This is very useful when working with an exter-
nal sequencer, to send notes and various MIDI
messages from the integrated keyboard and con-
trollers to the external sequencer, and then let the
sequencer send them back to the sound genera-
tor, without overlapping. See the MIDI chapter.

Mid 

Содержание Pa3X 61-keys





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Pa3X 61-keys

4iiii Sportiiiis User Manual preview
Sportiiiis
Бренд: 4iiii Страницы: 19
Hama AK-120 Operating Instruction preview
AK-120
Бренд: Hama Страницы: 2
SILITEN DK-9201BI User Manual preview
DK-9201BI
Бренд: SILITEN Страницы: 10
Yamaha Clavinova CLP-340 Installation Procedure preview
Clavinova CLP-340
Бренд: Yamaha Страницы: 2
Yamaha Clavinova CLP-330 Midi Data Format preview
Clavinova CLP-330
Бренд: Yamaha Страницы: 7
Yamaha Clavinova CLP-100 Owner'S Manual preview
Clavinova CLP-100
Бренд: Yamaha Страницы: 11
Yamaha Clavinova CLP-350 Owner'S Manual preview
Clavinova CLP-350
Бренд: Yamaha Страницы: 19
Yamaha CE25 Owner'S Manual preview
CE25
Бренд: Yamaha Страницы: 11
Yamaha Clavinova CLP-250 Owner'S Manual preview
Clavinova CLP-250
Бренд: Yamaha Страницы: 17
Yamaha Clavinova CLP-760 Owner'S Manual preview
Clavinova CLP-760
Бренд: Yamaha Страницы: 27
Yamaha Clavinova CLP-380 Data List preview
Clavinova CLP-380
Бренд: Yamaha Страницы: 42
Yamaha Clavinova CLP-110 Owner'S Manual preview
Clavinova CLP-110
Бренд: Yamaha Страницы: 46
Yamaha Clavinova CLP-152 (Japanese) Owner'S Manual preview
Clavinova CLP-152
Бренд: Yamaha Страницы: 52
Yamaha Clavinova CLP-110 Service Manual preview
Clavinova CLP-110
Бренд: Yamaha Страницы: 57
Yamaha Clavinova CLP-156 (Japanese) Owner'S Manual preview
Clavinova CLP-156
Бренд: Yamaha Страницы: 68
Yamaha Clavinova CLP-430 Owner'S Manual preview
Clavinova CLP-430
Бренд: Yamaha Страницы: 96
Yamaha Clavinova CLP- 430 Owner'S Manual preview
Clavinova CLP- 430
Бренд: Yamaha Страницы: 96
Yamaha Clavinova CLP-306 (Spanish) Manual De Instrucciones preview
Clavinova CLP-306
Бренд: Yamaha Страницы: 108

Бренды по названию

Популярные бренды

Загрузить еще бренды