Korg Pa3X 61-keys, Руководство пользователя

Страница: 30 / 276

26
Start up
The X-Fader slider
Keyboard, Style and Song Volume
By default, this slider balances the volume of the
Keyboard (RT, Realtime) tracks, against the
Style (ACC, Accompaniment), Pad and Song
(SEQ) tracks.
• When in Style Play mode, this slider bal-
ances between the Keyboard tracks, and
the Style and Pad tracks.
• When in Song Play mode, this slider bal-
ance between the Keyboard tracks, and the
Player and Pad tracks.
As an alternative, the slider can be used to con-
trol the Style/Song Volume without affecting the Keyboard
tracks (see “Balance Slider” on page 206 for information on set-
ting the slider’s behavior).
This is a relative control, whose effective maximum level is
determined by the MASTER VOLUME slider position.
When moved, a magnified version of the virtual slider appears in
the display, for more accurate positioning.
Note:
This slider only works in Style Play and Song Play mode; it
does not work in Sequencer mode.
The X-Fader slider
The X-Fader slider sets the relative volume of the two onboard
players (Player 1 and Player 2).
• Move it fully to the left to set Player 1 to the maximum level
and Player 2 to zero.
• Move it fully to the right to set Player 1 to zero and Player 2
to the maximum level.
• Move it to the center to set both Players at the same level.
This slider also selects the (see “Harmony Control” on
page 157), and may select the Lyrics, Score and Markers of one
of the two players.
Note:
When moving this slider fully to the right or to the left, the
Lyrics, Chords, Markers and Score page shown may change.
Note:
When turning the instrument on, move this slider to the cen-
ter, to avoid starting a Song at the minimum level.
Headphones
Connect a pair of headphones to the PHONES output, under the left
part of the keyboard (just under the joystick). You can use head-
phones with an impedance of 16-200 Ohms (50 Ohms suggested).
Use a headphone splitter to connect more than one pair of head-
phones.
Loudspeakers
Connect the optional PaAS – Amplification System to make it
the integrated loudspeakers of the Pa3X, adding a three-way
amplification system, a pair of dual-coil integrated speakers and
a bass-reflex box.
To install the amplification system, see “Installing the Pa3X
Amplification System (PaAS)” on page 248.
After installation, the overall volume can be controlled via the
MASTER VOLUME slider.
Speakers can be deactivated with the “Speakers On/Off ” param-
eter, that you can find in the “Audio Setup: Metro / MP3 / Speak-
ers” page of the Global mode (see page 216 for more
information).
Note: When connecting the headphones, the speakers are automat-
ically deactivated.
Audio Outputs
Audio outputs allow for connecting the Pa3X to an external
amplification system. See “Audio Output Section” on page 20 for
more details.
Audio Inputs
Audio inputs allow for connecting a microphone and other
audio source to the Pa3X. See “Audio Input Section” on page 19
for more details.
Use the MIC GAIN knob next to the MIC input to set the input
sensitivity. Use the MIC SETTING section in the control panel
to set the input volume and other parameters.
See the “Singing with a microphone” chapter on page 88, and the
“Audio Setup: Audio In” section on page 215, for more informa-
tion on connecting and setting the inputs and the audio source.
MIDI connections
You can play the internal sounds of your Pa3X with an external
controller, i.e. a master keyboard, a MIDI guitar, a wind control-
ler, a MIDI accordion, or a digital piano.
You can also control other MIDI devices with the Pa3X, or con-
nect it to a computer for use with an external sequencer.
As an alternative to the MIDI connectors, you can use the USB
Device port for direct connection to a personal computer.
See the “MIDI” chapter on page 242 for more information on
MIDI connections.
Player 2 Player 1