manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 79

75

Selecting elements

Style Select window

Reference

Previous/Next tabs

Scroll the lower tabs to the left or the right, when additional tabs
are available but cannot be seen in the display.

Performances

Press one of these buttons in the display to select a Performance.
Unless the DISPLAY HOLD LED is turned on, the window auto-
matically closes short after you select a Performance.

Style Select window

Press the Style area whereas it appears in the display, or one of
the STYLE buttons on the control panel, to open the Style Select
window. Use the STYLE buttons to go directly to the selected
bank.

Press EXIT to exit from this page and go back to the previous
page without selecting any Style.

Note:

 Depending on the status of the “Auto Style Select” parameter

(see page 234), a Style may be immediately selected when pressing
one of the STYLE SELECT buttons. The latest selected Style for that
bank will be selected.

Bank groups

Selected group of banks.

Side tabs (banks)

Use these tabs to select a bank of Styles. Each tab corresponds to
one of the STYLE buttons on the control panel.

Lower tabs (pages)

Use these tabs to select one of the available pages in the selected
bank. 

If you press again the same STYLE SELECT button on the con-
trol panel, the next page in the same bank is selected. This way,
you do not need to press one of the corresponding tabs in the
display in order to select a different page.

Styles

Press one of these buttons in the display to select a Style. Unless
the DISPLAY HOLD LED is turned on, the window automati-
cally closes short after you select a Style.

After selecting a Style from this window, its name begins to flash,
meaning it is ready to start playing at the beginning of the next
measure.

Pad Select window

Press the Pad area whereas it appears in the display, to open the
Pad Select window.

Press EXIT to exit from this page and go back to the previous
page without selecting any Pad.

Bank groups

Selected group of banks, corresponding to different types of
Pads. 

Hit

 are single-note, pre-programmed factory Pads.

Sequence

 are sequence-based, pre-programmed factory Pads.

User

 can be either single-note or sequence-based Pads, and can

be user-recorded or modified.

Side tabs (banks)

Use these tabs to select a bank of Pads.

Lower tabs (pages)

Use these tabs to select one of the available pages in the selected
bank. 

Pad

Press one of these buttons in the display to select a Pad. Unless
the DISPLAY HOLD LED is turned on, the window automati-
cally closes short after you select a Pad.

STS Select

Use the four SINGLE TOUCH SETTING button on the control
panel, to select one of the four STS associated with the current
Style or the selected SongBook entry.

Press the STS tab on the main page of the Style Play and Song
Play mode, or the Info tab on the SongBook mode, to see the
name of the available STSs.

Side tabs (banks)

Lower tabs (pages)

Bank groups

Styles

Side tabs (banks)

Lower tabs (pages)

Bank groups

Pads

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды