manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 73

69

Recording a new Song

Preparing to record

Quick Guide

3

Select the Backing Sequence (Quick Record) option and press OK to enter
the Backing Sequence Record mode.

Preparing to record

When you enter Backing Sequence Record, the most recently used Style is already selected, and all
tracks are ready to record. You could simply start recording as if you were playing in realtime with the
Styles. However, there are some settings that you may wish to edit.

•

If you like, adjust any editable parameter in the display.

After choosing the Backing Sequence

(Quick Record) option, the Backing

Sequence Record page appears.

Press the Style param-

eter (or one the STYLE

buttons) to open the

Style Select window,

and select a different

Style (as seen on

page 40).

Track(s) status. ‘Rec’ means they are ready 

to record. ‘Play’ means they are recorded 

and you can hear them. ‘Mute’ means they 

cannot be heard.

Measure counter. Neg-
ative numbers (-2, -1) 
are the precount, 
after which you can 
start recording.

Style’s Tempo. Change 
it, if you like.

Grouped tracks. During Quick Record, you cannot 

access each separate Song track. For ease of use, 

just two ‘master’ tracks are provided: Kbd/Pad (Key-

board/Pads) and Ch/Acc (Chord/Accompaniment).

Style’s Meter. You can-
not change it.

Press the Perf/STS 
parameter to open 
the Performance 
Select window, and 
select a different Per-
formance (as seen on 
page 36). As an alter-
native, you use the 
PERFORMANCE/
SOUND or STS but-
tons.

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды