manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 170

166

Sequencer operating mode

Transport controls

The Sequencer operating mode is the full-featured onboard
sequencer, where you can create a Song from scratch, or edit it.
You can also use this mode to edit the initial parameters of a
Standard MIDI File, either made with an external sequencer or
with Pa1X’s own sequencer.

You can save the new or edited Song as a Standard MIDI File
(SMF, i.e., a file with the “.MID” extension), and play it back
either in Song Play or Sequencer mode – or on any external
sequencer.

Transport controls

To play back a Song, use SEQUENCER 1 transport controls.
While in Sequencer mode, Sequencer 1 is used for all functions.
See “SEQUENCER 1 TRANSPORT CONTROLS” on page 10 for
more information.

Note:

 When pressing the 

 (PLAY/STOP) button to stop the Song

during playback, Song parameters are not reset.

The Songs and the Standard MIDI File
format

The native Song format for Pa1X is the Standard MIDI File.

When saving a Song as a SMF, an empty measure in automati-
cally inserted to the beginning of the Song. This measure con-
tains various Song initialization parameters.

When an SMF is loaded, the empty measure is automatically
removed.

Songs and Voice Processor Presets

You can use the Voice Processor while in Sequencer mode. For
this, just two settings are needed:

•

Select the Song track where you are recording chords to be
sent to the Voice Processor (see “Harmony Track” on
page 186).

•

Go to the Voice Processor Preset section of the Global
mode, and select the desired Voice Processor Preset.

Sequencer Play - Main page

Press SEQUENCER to access this page from another operating
mode. In this page you can load a Song, and play it back using
the transport controls for SEQUENCER 1 (see “Transport con-
trols” above).

Note:

 When switching from Style Play to Sequencer mode, the

Sequencer Setup is automatically selected, and various track
parameters may change.

To return to this page from one of the Sequencer edit pages,
press the EXIT or SEQUENCER button.

To switch between Song tracks 1-8 and 9-16, use the TRK. SEL.
button.

Page header

This line shows the current operating mode, transposition and
recognized chord.

Operating mode name

Name of the current operating mode.

Master transpose

Master transpose value in semitones. This value can be changed
using the TRANSPOSE buttons on the control panel.

Note:

 Transpose may be automatically changed when loading a

Standard MIDI File generated with an instrument of the Korg Pa
series.

To avoid transposing, “lock” the Master Transpose parameter in the
Global (see “General Controls: Lock” on page 232), then write the
Global to memory (see “Write Global - Midi Setup dialog box” on
page 257).

Sequencer operating mode

Song area

Page header

Page menu icon

Selected

track info

area

Sounds

area

Track volume/status area

Operating mode

name

Master Transpose 

(in semitones)

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды