manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 35

31

Playing Sounds

Playing different Sounds with your left and your right hand

Quick Guide

Playing different Sounds with your left and your right hand

You can play a single Sound with your left hand, in addition to playing up to three Sounds with your
right hand.

1

Press the SPLIT button in the KEYBOARD MODE section on the control
panel, to split the keyboard into Lower (left hand) and Upper (right hand)
parts.

2

Be sure the Lower track is set to play.

3

Play the keyboard.

 

Hint:

 You can select a

different Sound for the
Lower part, by follow-
ing the same procedure
used for the Upper 1
track. See page 27.

4

Return to the full keyboard playing mode by pressing the FULL UPPER
button in the KEYBOARD MODE section on the control panel.

Lower

Upper

If the Lower track is muted, press 
its icon status, and the play status 
icon will appear.

i

Note how the keyboard is split into two parts, each playing dif-
ferent sounds.

Lower

Upper

(Full) Upper

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды