Korg PA1X Скачать руководство пользователя страница 105

Страница: 105 / 424

101

Style Play operating mode

The DIRECT FD bank

Reference

While the “All” item is selected, press Open to open it. The
internal memory content appears.

Select the “Style” folder, and press Save To, to make the tar-
get device directory appear.

Insert the floppy disk in the disk drive.

If it is not yet selected, select the floppy disk (FD), by using
the Device pop-up menu.

Press New SET to create a new “.SET” folder.

Press the

(Text Edit) button. When the Text Edit dia-

log box opens, name the new folder “DIRECTFD”. Press
OK to confirm.

10.

Press OK to close the Create New SET Folder, and return to
the floppy disk directory.

11.

With the “DIRECTFD” folder selected, press Save To to
save the banks.

12.

Press the DIRECT FD button in the STYLE SELECT sec-
tion, to gain direct access to the saved Styles.

Device pop-

up menu

Содержание PA1X









































































































































































































































































































































































































































Результаты поиска

Содержание PA1X

Отзывы:

Бренды по названию

Популярные бренды

Korg PA1X, Руководство пользователя

Результаты поиска

Содержание PA1X

Отзывы:

Бренды по названию

Популярные бренды