manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 68

64

Singing with a connected microphone

Connecting a microphone

Pa1X is fitted with a powerful digital voice processor, based on technologies developed by TC Helicon,
including effects, four-part harmonization, and (optional) pitch correction and voice modeling.

Connecting a microphone

To sing along with the Pa1X, you must first connect a suitable microphone to its MIC input. Any
dynamic microphone is directly supported. To connect a phantom-powered condenser microphone,
you need an external phantom power supply. You can also connect the microphone though an exter-
nal mixer, and connect one of the mixer’s line outputs to the line input IN1 of the Pa1X.

1

Lower the Audio In track volume by using the corresponding slider.

 

Note:

 Lowering the

Audio In track volume
helps avoiding feedback.
Feedback is caused by
audio generated by the
Pa1X, returning to the
audio circuitry via the
microphone.

2

Connect a microphone.

If you connect a microphone to the MIC input, move the MIC/IN1 switch to the MIC position.
This allows the microphone signal to pass through the built-in high-quality preamp of the Pa1X.

If you connect a microphone to the IN1 input, passing through a mixer or a preamp, move the
MIC/IN1 switch to the IN1 position. This will allow you to use the Pa1X as a powerful outboard
effect processor.

Singing with a connected microphone

Access Voice Processor editing from the main page (tab Mic) 

and the GLOBAL button (items Voice Processor Setup and 

Voice.Processor Preset)

Microphone input

Microphone input volume control

i

To control the volume, the 
VOLUME LED must be turned 
on. If it is off, repeatedly press 
the SLIDER MODE button to 
change it. Please note that 

the 

SLIDER MODE status is saved 
with each Performance

.

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды