manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 245

241

Global edit mode

Audio Output: Metro / S/PDIF

Reference

In 2

The line input In 2 may be routed to the Right output, or deacti-
vated, depending on the status of the SELECT switch on the rear
panel.

•

If the SELECT switch it is set to “MIC”, this input is sent to
the Right output.

•

If the SELECT switch is set to “1”, it is deactivated.

Voice Processor Out

Use this parameter to assign an audio output (OUTPUT section,
on the back of the instrument) to the Voice Processor.

In 1/2 Out

Non editable.

 These output are fixed, and cannot be changed.

Audio Output: Metro / S/PDIF

This page lets you define various parameters for the Metronome,
the S/PDIF output, and the Speakers (for the Pa1X with inte-
grated speakers).

Metronome

Mode

Use this parameter to activate the metronome for the Style Play
and/or Song play operating modes.

Off

No metronome is heard.

Style

The metronome is always activated when playing
a Style.

Song

The metronome is always activated when playing
a Song.

Style+Song

The metronome is always activated when playing
a Style or Song.

Volume

Use this parameter to set the volume of the metronome.

Click Out

The metronome’s click can be routed to any audio output. 

Hint:

 When sending the click to your drum player, we suggest to

select one of the sub-outs Out 1 and 2, to avoid it is sent to the audi-
ence through the Left+Right outputs.

Note:

 The selected Metronome Mode must not be Off, in order for

the click to be sent to an audio output during playback.

See “Tracks” on page 239 for detailed information on the avail-
able outputs.

S/PDIF Out

S/PDIF On/Off

Use this parameter to turn the S/PDIF digital audio output on or
off.

Note:

 This parameter is automatically set to Off each time you turn

the instrument on.

On

All tracks set to be sent to the Left+Right audio
outputs (see from page 239) are sent to the S/
PDIF output. Together with the audio signal, the
Word Clock sync signal is also output, with a fre-
quency of 48kHz.

When in this mode, the Pa1X becomes the Word
Clock master. No other master device can be con-
nected to the same digital audio system. Please,
refer to the connected audio device (mixer, audio
card…) for information on how to set it as a
Word Clock slave.

Off

No signal is sent to the S/PDIF output.

Speakers

Speakers On/Off

Not available on the Pa1X Pro.

 On a Pa1X with integrated speak-

ers, use this checkbox to turn speakers on or off. This option is
useful when the instrument is connected to an external amplifi-
cation system, and you don’t need the speakers.

Audio Output: MP3/CD

In this page you can program the MP3 (EXBP-MP3) and Audio
CD (CDRW-1) options.

MP3 Board

This section only appears when the optional EXBP-MP3 board has
been installed.

Gbl

Gbl

Gbl

Gbl

Gbl

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды