manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 202

198

Sound operating mode

Pitch: Pitch Mod

pitch. This can be used to simulate the downward swoops that a
guitarist produces using the tremolo arm.

-60…+12

Maximum pitch change in semitones.

AMS (Alternate Modulation Source)

This parameter selects the source that will modulate the pitch of
the selected oscillator. See “AMS (Alternate Modulation Source)
list” on page 213.

Intensity

This parameter specifies the depth and direction of the effect
produced by “AMS”. With a setting of 0, no modulation will be
applied. With a setting of 12.00, the pitch will change up to one
octave.

For example, if you set “AMS” to After Touch and apply pressure
to the keyboard, the pitch will rise if this parameter is set to a
positive (+) value, or fall if this parameter is set to a negative (–)
value. The range is a maximum of one octave.

-12.00…+12.00

Parameter value.

Pitch EG

The Pitch EG (Envelope Generator) is unique to all oscillators.

Velocity 

Intensity

This parameter specifies the depth and direction of the modula-
tion that the pitch EG specified on “Pitch: Pitch EG” will apply
to the pitch. With a setting of 12.00, the pitch will change a max-
imum of ±1 octave.

-12.00…+12.00

Parameter value.

Pitch EG AMS (Alternate Modulation Source)

This parameter selects the source that will modulate the pitch
EG of the selected oscillator. See “AMS (Alternate Modulation
Source) list” on page 213).

Pitch EG Intensity

This parameter specifies the depth and direction of the effect
that “AMS” will have. For example, if you set “AMS” to Velocity
and set this value to +12.00, the velocity will control the range of
pitch change produced by the pitch EG in a range of ±1 octave.
As you play more softly, the pitch change will draw closer to the
pitch EG levels.

Note:

 “Intensity” (Pitch EG) and AMS will be added to determine

the depth and direction of the pitch modulation applied by the
pitch EG.

Portamento

Enabled

This parameter turns the portamento effect (smooth change in
pitch from one note to the next) on/off, and specifies how it will
be applied.

Note:

 Portamento will also be switched when CC#65 (Portamento

SW) is received.

On

Portamento will be applied.

Off

Portamento will not be applied.

Fingered

This parameter specifies whether the portamento effect restarts
or not with each note played.

On

Portamento will restart with each note.

Off

Portamento will not restart with each note.

Time

This parameter sets the portamento time. Increasing the value
will produce a slower change in pitch.

000…127

Portamento time in MIDI value.

Pitch change (level)

Softly played
(Intensity (Pitch EG) setting)

Strongly played with a
negative (–) value

Strongly played with
a positive (+) value

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды