Korenix JetNet 6910G-M12 Series, Руководство пользователя

Страница: 125 / 146

121
copied to destination/analysis ports. You can choose single port or any combination of
ports, you can monitor them in Rx only, Tx only or both Rx and Tx. Click on checkbox of
the Rx, Tx to select the source ports.
Destination Port: This is also known as Analysis Port. You can analyze the traffic of all the
monitored ports at this port without affecting the flow of traffic on the port(s) being
monitored. Only one of the destination ports can be selected. A network administrator
would typically connect a LAN analyzer or Netxray device to this port.
Once you finish configuring the settings, click on Apply to apply the settings.
4.13.5 Event Log
In the 4.10.3, we have introduced System
Log feature. When System Log Local mode
is selected, JetNet 6910G-M12 will record
occurred events in local log table. This page
shows this log table. The entry includes the
index, occurred data and time and content of
the events.
Click on Clear to clear the entries. Click on
Reload to refresh the table.
4.13.6 Ping Utility
This page provides Ping Utility for users to ping remote device and check whether the
device is alive or not. Type Target IP address of the target device and click on Start to start
the ping. After few seconds, you can see the result in the Result field.